How to Install Cabinets in the kitchen. Installing cabinets in your kitchen can be a daunting task. From measuring to cutting and assembling, it’s no small project. However, with the right tools and some tricks of the trade, you can make this home improvement project a success. We’ve compiled some important tips for installing cabinets that will make this process go as smoothly as possible.
Cut Your Cabinets to Size
Before you start installing cabinets, it’s important to cut them to size. This is a crucial step that can easily be overlooked. You want to measure twice and cut once. To do this, use a straight edge and a pencil to draw the cutting line on the cabinet face frame. Then, use a circular saw with an abrasive blade for wood to make the cuts. After you make your cuts, sand any rough areas that may remain with fine-grit sandpaper until the cuts are smooth.
Attach the Cabinet to Wall
The most important step to installing a cabinet is attaching it to the wall. You should hang the cabinet from the top screws and then screw it in from the bottom. This will make sure the cabinet is securely attached to both sides of your wall.
Connect the Cabinets Together
When you purchase cabinets, they’ll come with a set of connectors that help you assemble the cabinet boxes together. These connectors are like puzzle pieces — they fit into the corners of your cabinet and then slide into the other corner to keep them in place.
To install cabinets, it’s important to use these connectors as quickly as possible. Once you’ve put them together, it can be a little difficult to move them around on your own.
See More: Cheap Sectional Sofas Under $500 Buyer’s Guide and Reviews
Layout the Cabinets and Draw a Plan
How to Install Cabinets in the kitchen. Before you start installing your cabinets, it’s important to layout the cabinets and draw a plan for where the cabinets will go. You can do this by measuring the height and width of the room, noting what appliances or plumbing fixtures need to be installed, and marking where the doors and windows are. Once you have these measurements down, put them on paper with a scale drawing of your kitchen so that you can accurately measure how tall your cabinets should be.
Gather your Materials
If you’re going to install cabinets, it’s crucial that you have the right tools on hand. That includes a tape measure, compass, saws, drills, nails, and screws. Of course, these aren’t the only tools that can help you install cabinets. You might also want to consider a carpenter’s square and a stud finder.
Drill the Cabinet holes
The first step in installing your new cabinets is drilling holes for the screws. Measure and mark your wall space before drilling any holes. Screws can go through drywall, wood, plaster, or other materials so it’ll be important to drill into a stud if you are not going through the drywall. If you are going through drywall, make sure to use anchors for extra support.
Fit and Fasten the Cabinet to the Wall
The first step in installing cabinets is to fit and fasten them to the wall. Before you do this, you will want to measure the distance from the wall to the cabinets so that they are evenly spaced. For example, if you have a standard 8” cabinet, you would measure at 2” intervals making sure that each measurement is an even 2” space. Then use a level to make sure your measurements are accurate before drilling holes into the wall with your drill. Once this is done, make sure not to drill through any pipes or vents near the baseboard.
Once your holes are drilled, it’s time for the installation of the cabinet hardware by screwing in a bracket for every hole. This will hold the cabinet securely in place while you work on attaching doors and drawers. Make sure not to attach any brackets that go over pipes or electrical outlets where screws may penetrate these areas.
Install your Drawer Slides
How to Install Cabinets in the kitchen. The drawer slides go into the cabinet frames, so they come before the cabinets. Install them first. This will make it easy to measure your cabinets. If you are installing a new kitchen, you want to make sure that the drawer slides are compatible with your cabinets.
Cutting Your Cabinets
One of the most important steps of this project is cutting your cabinets to size. Although many people think that a table saw is needed for this step, you can also use a circular saw, jigsaw, or hand saw. When using a power tool, it’s important to wear safety goggles and gloves. You’ll want to measure the height of the cabinet before you cut it and make sure that you have enough room for movement.
Conclusion
Installing kitchen cabinets is a fairly straightforward process that is made easier by following these simple steps. Now that you know how to install cabinets, you can work towards bringing your kitchen from drab to fab!