Chipped paint on kitchen cabinets can be a pain to deal with, especially when you want everything to look perfect. This is a guide on how to repair chipped paint on kitchen cabinets. You will need some supplies that include sandpaper, primer, paint, and a foam brush. If you are going to use a light color be sure to use an oil-based primer because it will provide more protection against the elements.
Please remember that if the cabinet is very old and not in good condition, it may be worth your while to just replace them instead of fixing them.
What You Need to Repair Chipped Paint on Kitchen Cabinets
To repair chipped paint on kitchen cabinets you will need sandpaper, primer, paint, and a foam brush. You will also want to gather some masking tape to protect areas that are not yet painted. This way you can paint those areas later. Here is a list of what you should have in your cabinet painting kit:
-Sandpaper – Primer – Paint – Foam Brush – Masking Tape
What is the Best Way to Repair Chipped Paint on Kitchen Cabinets?
The best way to repair chipped paint on kitchen cabinets is using a foam brush and applying a coat of primer. Once the primer has dried, use sandpaper to lightly sand the area. Apply two coats of paint and allow 10 minutes for it to dry between coats.
How to Paint over Chipped Paint on Kitchen Cabinets
1. Sand the area with a bit of fine-grit sandpaper or a wire brush to remove any loose paint and dirt from the surface.
2. Apply a coat of primer to the area, starting at one edge and working in short strokes across the damaged area–it’s better to apply too little than too much primer as it can be difficult to remove excess primer after it dries.
3. Let primer dry for about 20 minutes (or follow manufacturer’s instructions) before applying paint.
4. Paint over the damaged area with two coats of paint, letting each coat dry between applications–always use oil-based paint in a light color if you plan on painting over chipped paint on kitchen cabinets.
See More: Best Slipcovered Sofas Review In 2022
Use Primer Before Painting
After sanding the cabinets and getting rid of any loose pieces of paint, use a primer. Make sure to apply it generously because it will help to protect the cabinet from water and other substances that might be sitting on top of it.
Next, you will want to paint over the primer with your desired color. If you’re going to use a light color and don’t have an oil-based primer, make sure that you also use an oil-based paint as well. You can find many different colors at a hardware store or even in your cabinet’s current color if it is available. Be sure to let the paint dry for 24 hours before applying another coat or touching anything that was painted.
Prime the Chipped Area
First, you will need to prime the area that has been chipped. You should use an oil-based primer because it provides more protection against the elements. If you are going to use a light color, be sure to use an oil-based primer.
Once you have primed the area, let it dry completely before proceeding with any painting steps.
Repairing Chipped Paint on Kitchen Cabinets
It is possible to repair chipped paint on kitchen cabinets. To do this, you need some supplies including sandpaper, primer, paint, and a foam brush. If you are going to use a light color be sure to use an oil-based primer because it will provide more protection against the elements.
First, the surface needs to be sanded down with sandpaper, which will remove any loose paint or varnish. After that, apply the primer and let it dry for 24 hours. Next, apply two coats of paint to cover up the entire area of damage and let it dry for another 24 hours. Lastly, clean off any extra paint from around the cabinet with a wet paper towel or old rag; this will help protect the new finish from dirt or dust settling on it later on.
When to Replace your Cabinets Instead of Repairing them
Cabinets can be expensive, but if you have the money to buy new cabinets then sometimes it’s worth doing. Sometimes repairing old cabinets can get expensive and take a long time to do. You might be better off buying new ones instead of fixing them.
With that said, if your cabinets are just chipped and not in bad shape, or maybe you don’t want to spend the money on new ones then here is what you need to do:
1) Sand down the cabinet surfaces with 100 grit sandpaper. Be sure not to have any unpainted edges left.
2) Use a damp cloth or sponge to thoroughly wipe down all surfaces of the cabinet so there is no dust left behind. Make sure all seams are also wiped down.
3) Apply oil-based primer with a foam brush as smoothly as possible without leaving thick lines or ridges. Let dry overnight before applying paint.
4) Mix paint with 5% water and apply two coats using a foam brush. Let dry for at least 24 hours before use.
What You Will Need
There are many supplies you will need for this project.
The first thing you’ll need is sandpaper, which should be in a coarse grit. This will help to remove all of the loose paint, and then you can use a water-based primer to prime the surface. If you are going to use a light color, be sure to use an oil-based primer because it will provide more protection against the elements. You’ll also want a foam brush or roller, depending on what your preference is, and paint that matches the color of your cabinets.
Conclusion
With these tips, you will be able to repair chipped paint on kitchen cabinets and get your kitchen looking like new again. You will also be able to save your cabinets from needing to be replaced.
